FABRIC TESTING EQUIPMENTS

The facility of controlling the test via Microcontroller with Max-force,

Tenacity & Elongation.

Data safety facility is also available.

Max hold test can be carried very effectively.

Extremely powerful internal software makes the machine versatile.

With the availability in varied specifications, these machines are

immensely used to check the breaking force of fabric, jute bag, HDPE

bag, Carpet and non-woven fabric

This machine furthermore renowned as a materials testing machine , is

applicable to testing tensile tension, shearing force, peeling force,

compressive tension and elongation of components, components, and

finished merchandise for plastic, steel, textile, rubber, wire and twisted

cord, synthetic chemicals, cowhide, etc.

Capacity : Up to 500 Kgf

Aaccuracy : 10g to 50g S Type Load Cell fixed with Top Grip

Display Unit : N/mm , kgf/Cm , Pound

Operating System : Fully Automatic and Manual Both

Maximum Grip Separation : 1000mm

Motor : 0.5 hp , Crompton / ABB 220V AC 50 Hz

Display Units : Load, Speed , Elongation

Variable Speed : 50 to 500 mm /min

Calibration : Self Calibrated

With Specimen Cutting Template

With Window based Software licensed to customer

Report : Tensile Strength, Elongation, Yield Strength with Graph.

With Desktop Computer with Genuine Window 7 Software

In accordance with industrial standards, these chambers

are manufactured

Determination of Picks or Ends is needed or the weave is too

fine.

Double-Walled Structure Along With Glass Wool Insulation

Stainless Steel Inner Chamber And Mild Steel Powder Coated Outside Body

Fully Ss Models Are Also Available

Two Adjustable Perforated Shelves For Effectively Keeping The Samples

The Chamber Is Heated With Air-Circulating Fan & Heater

Electrically Cooled Chamber, With The Support Of Compressor Cooling Coils Set In Ribs On The Chamber Side

Digital Temperature Indicator & Controller For Temperature Control

Digital Humidity Controller Controls The Humidity

To See The Samples There Is A Transparent Viewing Window

Light Arrangement Inside The Chamber To Check The Samples

Push Kind Door Locking System

Power 220 Volt Ac 50 Hz. - Single Phase

The warm air is evenly distributed throughout the chamber through efficient air circulating fan on top of the chamber.

Digital Temperature Indicator Cum Controller controls the temperature inside the test chamber.

Inner walls are of stainless steel and outer walls of mild steel sheet.

Chamber is provided with two ventilation ports.

Long life

Inner Chamber Construction : Stainless Steel with air circulation fan

No. of Shelf : 3 Shelf (removable)

Temperature Range : Ambient to 250C

Temperature Sensitivity : ±0.1C

Electric Supply : Single phase 220 Volts, AC Supply

Heater Supply : 1000 watt Single Phase

Inner l Dimensions of the UNIT : 18" X 18" X 18

Net weight of the unit : 30 kg.

FEATURES

The equipment effectively measures the tearing strength

It is userfriendly

It has an adjustable knife

A set of calibrated check weights are also supplied

It consists of antifriction ball bearings

SPECIFICATIONS

Capacity  1600 Gms 3200 Gms 6400 Gms

Tearing Distance  43  1 mm

Scale reading  0 to 100 of range

Slit Size  20 mm

Overall Dimensions of Unit  470W x 300D x410H mm

Distance between clamps  25  025 mm

Calibration check weight  At 1600 Gms At 3200 Gms At 6400 Gms

Clamping surface of each Clamp  355 mm Length x 155 mm Width

Scale reading  0 to 100 of range

FEATURES

IMADA Push Pull force gauge of 50 kgf

Vertical stand to hold the gauge with arrangement to change the position of gauge

Base which house the frame to grip the attachment

Button Pull Fixture  Connected with force gauge

SPECIFICATIONS

Force Rating  001 to 5000 kg

Force Resolution  001 Kg

Force measurement accuracy  05 of FSD

Minimum Crosshead stroke  500 approx

Crosshead displacement  Measurement Resolution 2 mm

Grips  3 Size Button Pull Strength Neck Stretch

Size  Weight  12 x 12 x 30  30 Kg

Suitable to grip buttons from  5mm to 25 mm

Anolagl indication of readings

Manual Clamping

Enhanced storage facility allows building a vast data library of all tests carried out at various points

This tester evaluates material test and provide reliable data.

Simple to operate

Capacity : 4000 kpa, 568 psi, 40 kg/cmi

Test Area : 30.5 mm Diameter

Digital Pressure Gauge : 0 to 100 kg/cmi

Overall Dimensions of Unit : 470(W) x 300(D) x 410(H) mm.

Net wt. : 30Kg.

TRAVERSE THREAD COUNTER


Used to determine number of threads per unit length in both the warp and weft directions

Determination of Picks or Ends is needed or the weave is too fine.

Microscope Magnification : 10 X Zoom

Fabric Can be checked for :  1 Inch or 20mm, 50mm

4 Digit digital ( Registers each increment with a beep)

Counter range : 0 to 9999